Contact Us
TEL :+86-0510-83452066
Fax: 86-0510-83452066
Phone: +86-13861810175
E-mail: 13861810175@163.com
Address: Qianzhou Street, Youlian Village Huishan, Wuxi, Jiangsu, China
Home > Knowledge > Content
Introduction to the use of textile dewatering machine
May 02, 2018

Textile dewatering machine is a dehydration equipment mainly used in textile printing and dyeing and cleaning industry. At present, the textile dewatering machine has the advantages of large carrying capacity, balanced and stable work, fine workmanship, and the like, and belongs to one of the commonly used equipment in the textile printing, dyeing, and cleaning industries. Its working principle is centrifugal dewatering, and the applicable materials include textiles (cloths, tablecloths, clothing, towels, carpets, etc.).

 

First, the textile dehydrator workplace selection requirements:

1. First, the foundation should be laid flat and solid to install the equipment;

2, clean up the surrounding debris, keep the scene clean;

3. Prepare drainage channels or ditches;

4, ready enough power 380V industrial power.

 

Second, the textile dehydrator installation:

1, first move the textile dehydrator to a suitable location, pay attention to equipment and personal safety;

2. Position the textile dewatering machine;

3, place a good damping pad;

4. Place the textile dehydrator on the shockproof pad;

5, the use of fixed bolts or pull screws to fix the dehydration machine;

6. Turn on the power.

 

Third, textile dehydration test machine and use:

1. Clean up the internal debris before trial.

2, start the textile dehydrator, enter the test run status;

3. Place the textiles that need to be drained evenly in the dehydration tank. Pay attention to distribute the weight as evenly as possible to avoid excessive swinging of the dehydrator;

4. Reasonably set the dehydration time according to different material conditions, and basically stop the water discharge to the drain outlet, and turn off the power supply; after the power is turned off, the brake can be used to stop the machine for about 10 seconds;

5. After the dehydrator stops rotating completely, remove the material.

 

Fourth, the daily maintenance of the textile dehydrator:

1. After the daily production work is finished, the textile dehydrator should be cleaned and cleaned in a timely manner to clean up the remaining materials in the dehydrator so as to prevent mildew and odor.

2. Regularly inspect the belt for tightness, add lubricating oil, and tighten the screws to ensure that the equipment works well;

3, temporarily do not use, you need to naturally dry the textile dehydrator, do a good job to cover, avoid foreign matter mixed into the dehydration machine.

http://www.zmymachine.com/

Previous: Briefly describe the powerful function of high temperature fabric dyeing machine

Next: Yarn dryer experience sharing