Contact Us
TEL :+86-0510-83452066
Fax: 86-0510-83452066
Phone: +86-13861810175
Address: Qianzhou Street, Youlian Village Huishan, Wuxi, Jiangsu, China
Home > Knowledge > Content
Performance characteristics and use requirements of towel dyeing machine
Nov 10, 2018

The towel dyeing machine is made of all stainless steel, and the mechanical speed control has the advantages of no noise, convenient speed regulation, etc. It is an ideal dyeing equipment. In the process of dyeing, the dyed leaves are stirred in the forward and reverse directions, so that the dyeing is in a floating state, the dyeing is uniform, the penetrating power is strong, and the dyeing is not easily damaged.


It should be noted that it is necessary to use according to the regulations during use. First of all, the amount of fabric placed in the towel dyeing machine should be moderate, not too much or too little, too much easy to overload the machine, and easily damage the machine. Moreover, when the fabric is placed in the drum, it should be placed evenly to avoid excessive vibration and other phenomena, thereby affecting work efficiency.


Note that after the dyed fabric is placed, it should be confirmed that the door of the towel dyeing machine is closed to prevent the fabric from being pulled out of the cylinder. When the drain valve is opened, special attention must be paid to the water level not exceeding the specified range. The drum should be cleaned before use to avoid affecting the dyeing effect of the towel dyeing machine.


Previous: Application of frequency converter in high temperature and high pressure cloth dyeing machine

Next: Elastic band continuous dyeing machine operating procedures