Contact Us
TEL :+86-0510-83452066
Fax: 86-0510-83452066
Phone: +86-13861810175
E-mail: 13861810175@163.com
Address: Qianzhou Street, Youlian Village Huishan, Wuxi, Jiangsu, China
Home > Knowledge > Content
The yarn dewatering machine is mainly used in the process of crushing
Jul 20, 2018

The yarn dewatering machine is mainly used in the process of crushing, rinsing, and circulating rough washing in the process of use, in order to replace the manual fishing, and to increase the level of cleaning and automatic high-speed dehydration function, so as to save labor and improve The significant purpose of cleaning quality, saving power consumption, and can be matched with automatic conveying devices to form a higher level of automated assembly line production.

The use of yarn dewatering machine precautions

1. Different yarns with different water absorbency should be dehydrated separately.

2. The newly installed dehydrator or newly connected wire must ensure that the motor rotates in the correct direction.

3. If the yarn is strongly uneven due to the uneven placement of the yarn, the power switch should be turned off immediately, and the fabric should be placed again and then dehydrated.

4. Do not overload the yarn. In particular, take special care when removing non-clothing items.

5. When the machine is running, do not put your hand into the inner spin basket area of the dehydrator.

Yarn dewatering machine operating procedures

1. Check that there is enough grease (grease) in each lubrication area. Check for leaks at the connection between the pneumatic system piping and the valve. Check the flexibility of all valves in the mud, water, and drug lines. Open the line manual valve.

2. Check if the power supply voltage is normal. Check whether the electrical switch and filter belt protection device are reset.

3.Before starting the machine, it is necessary to check whether the position of the filter belt over-bias detection arm of the filter correction correcting arm and the machine terminal is correct, and whether the manual corrective action of the correcting device is normal. Otherwise, the blind opening opportunity will seriously damage the filter belt and the switch.

http://www.zmymachine.com/


Previous: Standard structure and use characteristics of bulk fiber dryer

Next: Main features of cheese yarn dryer and air filter net